There are many steps involved in auto body repair, and auto body repair paint would require a lot of skill for it to be successfully done. It is important to familiarize yourself with the different techniques in auto body paint and apply tips and tricks to help you ensure that your car receives excellent service. The different steps of auto body paint include auto body preparation, removing the trims, vehicle color code, masking the vehicle, getting an even color painting, and using a guide coat. It will be easier for you to get the job right by having a good preparation of your car. The damaged part must be cleaned and sand the at least the level of the car’s original paint to provide a greater surface to build on.
It is essential to remove all the trims around as well as over areas where you’ll be painting to make the auto body repair painting job easier. If you like to have the original color of your vehicle after an auto body repair, you have to search for the vehicle color code. Looking for your vehicle’s color code is the best way in finding the exact match of color for your car because this is used by car manufacturers in describing the mix colors used in a vehicle. An important step when dealing with auto body repair paint is making because it helps in the finishing look without any overspray. Masking refers to the step that is used in preparing the car for filler or primer coats. You need to make sure that you are able to mask off the areas where paint will not be done by using weather strips or weather strip tapes for sealing the joints between body panels. It is a good idea using a plastic knife to push the masking tape under hard-to-reach surfaces and areas such as around window moldings or windshield.
It is essential to get an even color painting with the use of a spray gun. Get an even color by pulling the trigger of the spray gun to the surface area to be painted, and when it is past that area, just stop or release the trigger. In order to have a smooth body paint, it helps using a guide coat instead of using a primer or filler. A guide coat refers to a thin sparse coat of a contrasting color of primer applied on the top of the last coat of primer or filler. If you are looking for a professional auto body painter, we are here to help you out, feel free to check our homepage or website now.